677 로열티 프리 오디오 트랙들 "Grm Tools"에 대한

Atlas copco rrc 22f pneumatic chisel hammer used to force hot steel four times. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Gas-powered leafblower. Starts in distance, gets closer, then recedes again. Recorded with the zoom h4n in 48k/24bit.

Riding mower in front yard, recorded out front window. Some reflective ambience from front of masonry house. Recorded with the zoom h4n in 48k/24bit.

Gas bottle (20 kg) hit with a hose coupler once. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Leg vise being tightened slowly. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Pulling out and letting go of a metal tape measure so it slaps back into its housing.

Sound of working electric planer.

The source of this sound is https://freesound. Org/people/doomyd/sounds/530580/ - a clean electric guitar open a string. This sound has been processed using the harmonic plus stochastical analysis of the sms-tools package https://github. Com/mtg/sms-tools with frequency scaling and frequency stretching, to give a metallic flange & 2 octave bend effect.

Moving some tools and boards.

Real grinder sound.

Recording of a handheld hacksaw sawing at a piece of ply wood. Recorded inside a workshop using a zoom h6 recorder. Hard loud audio.

Playing around with, picking up and dropping metal tools in a toolbox.

Collection of 4 loop variations with a special compressor. For use in your production. 120 bpm.

An attempt to fill a request for the sound of rummaging through a wooden chest (trunk) filled with wooden toys. . . Gear: zoom h6, xyh-6 x/y capsule (120 degree stereo image), rycote windjammer, mounted on a tripod, late 1800s wooden trunk, various wooden toys/items. Please feel free to leave feedback and ratings. I would love to hear how you put the sound to work.

Harmonic plus stochastic resynthesis of the female speech sound: http://www. Freesound. Org/people/xserra/sounds/254374/. This was done using the harmonic plus stochastic model implemented in the sms tools: http://mtg. Upf. Edu/technologies/sms. The parameters used for the analysis were:. - window: blackman- window size: 2001- fft size: 2048- magnitude threshold: -100- minimum duration of sinusoidal tracks: 0. 05- maximum number of harmonics: 100- minimum fundamental frequency: 150- maximum fundamental frequency: 250- maximum error in f0 detection algorithm: 5- max frequency deviation in harmonic tracks: 0. 05stochastic approximation factor: 1.

Sound recording made at the beans in chicago. People chatting reverberated by the sculpture.

Recorder: tascam dr-60d mkiimicrophone: sennheiser me66.

Cutting wood part with electric metal saw.

Alluminium part cutted with electronic vertical saw in workshop.

Sample of a dewalt handheld power drill.

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

Rythmic sound from a sharpening machine: a diamond disc is bitting the iron of a saw blade. Close up. France, nov2022. Recorded with a schoeps cmc6 mk41 and a schoeps ab ortf, reducted to stereorecorded on sounddevice mixpre648khz, 24 bits, wave stereo.

Construction ambience: construction site, scaffolding dismantling, metal on metal, voices, apartment courtyard, lifting crane, tools, light traffic. Date/time: 27 january 2023, afternoonlocation: malmö, swedenrecorder: zoom h1n. Feel free to use these sounds in any of your projects. Please attribute to cher1101.

Recorded on an early summer day in poland, very close to a construction site of a big apartment block at the coast of puck bay with my tascam dr 22, you will hear even the clicking of the big power switches of a crane that swung by from time to time :-).

Fume extractor turned on, running in it's own pace and turned off as heard close to the suction nozzle. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Air hose coupler removed. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

Recorded with fl studio 10.

A rough and raw recording of a mechanic doing some tightening work on a tire.

A few variations of a ratchet being used in a small garage. The sound is close mic-ed with still a little room ambience on it. Recording equipment: akg c214 / focusrite saffire pro 24.

Stochastic approximation of the residual signal obtained after subtracting the harmonics from a female speech sound: http://www. Freesound. Org/people/xserra/sounds/254374/. This was done using the harmonic plus stochastic model implemented in the sms tools: http://mtg. Upf. Edu/technologies/sms. The parameters used for the analysis were:. - window: blackman- window size: 2001- fft size: 2048- magnitude threshold: -100- minimum duration of sinusoidal tracks: 0. 05- maximum number of harmonics: 100- minimum fundamental frequency: 150- maximum fundamental frequency: 250- maximum error in f0 detection algorithm: 5- max frequency deviation in harmonic tracks: 0. 05stochastic approximation factor: 1.

Harmonic component obtained from the analysis of a female speech sound: http://www. Freesound. Org/people/xserra/sounds/254374/. This was done using the harmonic plus stochastic model implemented in the sms tools: http://mtg. Upf. Edu/technologies/sms. The parameters used for the analysis were:. - window: blackman- window size: 2001- fft size: 2048- magnitude threshold: -100- minimum duration of sinusoidal tracks: 0. 05- maximum number of harmonics: 100- minimum fundamental frequency: 150- maximum fundamental frequency: 250- maximum error in f0 detection algorithm: 5- max frequency deviation in harmonic tracks: 0. 05stochastic approximation factor: 1.

Hitting a metal hammer on a metal big nail thing, i fail to figure out the correct word for the tool being hit here. Extracted from a video (http://img. Youtube. Com/vi/ibovrwev2q0/2. Jpg) by a us government agency, thus public domain. Find many more military sounds in my military sounds pack, also located on freesound. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

Made with various vst plugins. Stereo mode.

Poking around in my grandmother's barn - building is approx 140 years old and filled with old tools, furniture and other random things. Recording consists of a lot of rusty metal scrapes and thumps, footsteps on old wood, doors etc. Recorded on a hand-held sony pcm-d50. I've edited out the worst of the wind and other artifacts of my sloppy recording technique, but there may be some still in there.

This was created in pro tools using only the signal generator, and native mixer plugins e. G. Eq, delay etc.

Various sounds recorded in a traditional blacksmith's workshop. Furnace can be heard in the background. Includes hammering a horse shoe on an anvil and cooling it in water. Also includes blacksmith getting a burn from the horse-shoe and talking about it! no post-processing.

This sound was recorded using a zoom h1 audio recorder and edited on audacity.

The spinning sound of a concrete mixer. Recorded with mobile phone.

Recorded stereo xy mic configuration with two akg ck93 capsule mic with zoom h6.

Rippling sound from a metal vent that has rhythm of gear movement.

This a recoding of an arc welding machine being used to make electric sparks. Gear used: neumann ku100 dummy head, schoeps cmc 5u mk8, schoeps minicmit, zaxcom maxx.

This is a branding logo i made in pro tools rewire reason.

Wameta tig 1600 started. Recorded in 24-bit 96khz with a tascam dr-40 and a sony ecm-nv1. For details on sow: blacksmith ed1 sound pack see: www. Oree. Storijapan. Net/praxis/sound-of-work.

A circular saw cutting through some sheets of plywood.

A circular saw cutting through some sheets of plywood.

A circular saw cutting through some sheets of plywood.

A circular saw cutting through some sheets of plywood.

Field recording of a busy metal workshop in south wales uk. There is a male vocal in their that i find quite nice.